Customer HubADVANTouch
Relution makes it possible to manage interactive whiteboards from the ADVANTouch brand.
Supported product ranges and models
Relution supports the following ADVANTouch product series:
- ADVANTouch PRO 1, 2.0, 2.1, and 3
- ADVANTouch vGAP 2, 3, 4, and 5
Support is generally available from Android API 24 (equivalent to Android 7.0 or higher).
Enrollment
An enrollment is created for the platform Android with ADVANTouch selected as the type.
The Relution Companion for ADVANTouch (package name com.mwaysolutions.relution.advantouch) must be installed before enrollment. The standard Relution Companion cannot enroll with an enrollment of type ADVANTouch; the server rejects the enrollment.
In the Relution Companion, the server address and the enrollment code are entered.
The Companion then asks for several confirmations, and the displayed notifications and authorization requests are confirmed. After successful enrollment, a corresponding confirmation screen will appear.
The device should now be visible in the Relution Portal inventory.
Supported Actions
The following actions can be performed on ADVANTouch interactive whiteboards via Relution:
| Action | Description |
|---|---|
| Trigger Alarm → | |
| Remove App → | |
| Send File to Device → | |
| Wipe Device → | |
| Reboot Device → | Restart or shut down (Power off option) |
| Lock Device → | Prerequisite: a password or PIN is set locally on the device or via the manufacturer-specific policy (Enable LockScreen Pin) |
| Refresh Device Info → | |
| Send Message → | |
| Deploy Relution Store App → | |
| Update Operating System → |
Supported Policies
The following policies are supported on ADVANTouch interactive whiteboards:
| Policy | Restrictions |
|---|---|
| Hotspot → | |
| App Compliance → | |
| Certificate → | Device Owner |
Manufacturer-specific policy
The manufacturer-specific policy ADVANTouch offers the following settings:
| Setting | Description |
|---|---|
| Brightness | Set brightness to a fixed value from 0 to 100 |
| Enable Eye Care | |
| Lock touch input | |
| Boot Source | Set the active source after the display powers on (Do Not Change, Android, HDMI 1–3, USB-C 1–2, or VGA) |
| Current Source | Set the currently active source (same options as Boot Source) |
| No signal power off | Power off when no signal is received after the set time |
| No signal power off time | Time from 1 minute to 1 hour until power-off without a signal; only available when No signal power off is enabled |
| Wake on source plugged in | |
| Allow source alias | Once enabled, set aliases for Android, HDMI1, HDMI2, HDMI3, and USB-C1 |
| Enable Ethernet | |
| Wake on LAN | Enable the Wake-on-LAN feature |
| Mute | |
| Volume | Set volume to a fixed value from 0 to 100 |
| Enable LockScreen Pin | Set a lock screen PIN (exactly 4 digits) |
| Enable administrator lock | Set a password for the administrator lock (exactly 4 digits) |
| Enable settings lock | Only available when the administrator lock is enabled |
| Language | Set the device language (English, German, or Spanish) |
| Enable Automatic OTA Update | |
| Enable installation from unknown sources | Allows installation from unknown sources, including USB drives |
| Power on automatically | Set weekdays and time for automatic display power-on |
| Power off automatically | Set weekdays and time for automatic display power-off |
| Time until panel goes into standby mode | Don’t change, Never, 15 or 30 minutes, 1, 1.5, or 2 hours |
A new configuration is preset with the following values: brightness 100, volume 33, language German, standby Never; Enable Ethernet, Enable installation from unknown sources, and Wake on source plugged in are enabled. Brightness, volume, and language have no “Don’t change” option, so these values are always set by the policy.
After changing the lock screen PIN or the administrator lock, a restart of the device might be required for the changes to take effect.
Enable Device Owner
To enable device owner specific functions, the device is first connected as described in Android Debug Bridge setup and connection →.
Once the device is connected, device owner mode is enabled by executing the following command:
adb shell dpm set-device-owner com.mwaysolutions.relution.advantouch/com.mwaysolutions.relution.receiver.MdmDeviceAdminReceiver