Customer HubVS
Relution makes it possible to manage interactive whiteboards from the VS brand.
Supported product ranges and models
The following product series are supported:
- VS-S-E1
- VS-S-E3
Enrollment
An enrollment is created for the platform Android with the type VS. An individual enrollment link is generated for each enrollment. The link is then opened on the device, and the instructions on the webpage are followed.
The Relution Companion for VS can be downloaded and installed via the displayed Download button.
After the Companion has been installed successfully, the enrollment is started from the enrollment page.
The Companion then opens automatically and prompts confirmation of several notes and authorizations. After successful enrollment, a corresponding confirmation screen will appear.
The on-screen instructions are then followed until the enrollment is completed.
The device should now be visible in the Relution Portal inventory.
Supported Actions
The following actions can be performed on VS interactive whiteboards via Relution:
| Action | Description |
|---|---|
| Trigger Alarm → | |
| Remove App → | |
| Send File to Device → | |
| Wipe Device → | |
| Reboot Device → | Restart or shut down (Power off option) |
| Lock Device → | |
| Refresh Device Info → | |
| Send Message → | |
| Deploy Relution Store App → | |
| Update Operating System → |
Supported Policies
The following policies are supported on VS interactive whiteboards:
| Policy | Restrictions |
|---|---|
| App Compliance → |
Manufacturer-specific policy
The manufacturer-specific policy VS offers the following settings:
| Setting | Description |
|---|---|
| Brightness | Set brightness to a fixed value (0–100), default 100 |
| Enable Eye Care | |
| Lock touch input | |
| Boot Source | Set the active source after the display powers on: Do Not Change (default), Android, HDMI 1–3, USB-C 1–2 or VGA |
| Current Source | Set the currently active source, same options as Boot Source |
| No signal power off | Powers off the display when no signal is received for the set time |
| No signal power off time | Time without signal until power-off (1 minute to 1 hour, default 5 minutes); only when No signal power off is enabled |
| Wake on source plugged in | Enabled by default |
| Allow source alias | Once enabled, aliases can be assigned for Android, HDMI1–HDMI4, PC and VGA1 |
| Enable Ethernet | Enabled by default |
| Wake on LAN | |
| Mute | |
| Volume | Set volume to a fixed value (0–100), default 33 |
| Enable lock screen PIN | Set a lock screen PIN with exactly 4 characters (required when the option is enabled); a restart of the device might be required for the change to take effect |
| Language | Set the device language, default German |
| Enable automatic OTA update | |
| Enable installation from unknown sources | Allows installation from unknown sources, including USB drives; enabled by default |
| Power on automatically | Set weekdays and time for automatic display power-on |
| Power off automatically | Set weekdays and time for automatic display power-off |
| Time until panel goes into standby mode | Don’t change, Never (default), 15 minutes, 30 minutes, 1 hour, 1.5 hours or 2 hours |